Leeham News and Analysis
There's more to real news than a news release.
Leeham News and Analysis
- The BWB has a long way to go before flying passengers, freight May 12, 2025
- Bjorn’s Corner: Air Transport’s route to 2050. Part 21. May 9, 2025
- Does an A220-500 need a new wing and engines? Part 2. May 8, 2025
- Embraer downplays tariff impact on 2025 results May 6, 2025
- JetZero readies effort for private equity fund raising May 5, 2025
The production cost trap for eVTOL upstarts
Subscription required
By Bjorn Fehrm
April 13, 2023, © Leeham News: Last week, we gave the example of a new propulsion principle 30-seat airliner as a project that would face the liquidity strain of initial production costs. We continue today with a look at the leading eVTOL projects, where development costs are passing $1bn and growing.
What will be the cash burn before these projects generate positive cash flow from serial production sales and services? We use our production cost model to analyze the situation.
Figure 1. Our generic eVTOL uses an early rendering of the Vertical VX4 as an illustration. Source: Vertical Aerospace.
Summary:
- VTOL projects promise early payback of invested capital.
- Our production cost model says otherwise.
Bjorn’s Corner: New aircraft technologies. Part 7. Propulsion
By Bjorn Fehrm
April 7, 2023, ©. Leeham News: This is a summary of the article New aircraft technologies. Part 7P. Propulsion. The article discusses how developments in the next-generation airliner propulsion system will be the second most important area for improved efficiency and lower emissions after we have decided on the fuselage type.
Figure 1. The CFM LEAP engine gained 15% efficiency compared to the engine it replaced, the CFM56. Source: CFM.
Bjorn’s Corner: New aircraft technologies. Part 7P. Propulsion
Subscription required
By Bjorn Fehrm
April 7, 2023, ©. Leeham News: This is a complementary article to Part 7. Propulsion. It discusses in detail the next-generation propulsion systems and what to expect from their possible increase in performance and efficiency.
The production cost trap for upstarts
Subscription Required
By Bjorn Fehrm
April 6, 2023, © Leeham News: The last five years have been among the busiest in aeronautical history, with announcements of new aircraft and VTOLs based on greener propulsion technologies. The public focus has been on the hurdle for these projects to achieve regulator certification, how long this will take, and how much it will cost. We have hundreds of experts publishing articles on the subject.
But there is another hurdle as large as certification for these projects: the initial production cost. It’s just that the knowledge about this more difficult-to-understand phase is poor among the experts. But, looking at history, the majority of new airliner entrants die during early production, not during development.
Why? We use our production cost model to explain.
Figure 1. Heart Aerospace ES-30; a typical startup project. Source: Heart Aerospace.
Summary:
• Startup projects fight to get the investments for development.
• Little do they know this is only halfway to success.
Bjorn’s Corner: New aircraft technologies. Part 6. Fuselage manufacturing
By Bjorn Fehrm
March 31, 2023, ©. Leeham News: This is a summary of the article New aircraft technologies. Part 6P. Fuselage manufacturing. The article discusses how a non-circular cross-section drives material use towards composites and the difficulties of manufacturing aeronautical composite structures in high volumes.
Figure 1. The elliptical NMA cross-section compared with A321 and 767 cross-sections. Source: Leeham Co.
Read more
Bjorn’s Corner: New aircraft technologies. Part 6P. Fuselage manufacturing
Subscription required
By Bjorn Fehrm
March 31, 2023, ©. Leeham News: This is a complementary article to Part 6. Fuselage manufacturing. It discusses in detail how to manufacture a non-circular fuselage that avoids fatigue problems.
Bjorn’s Corner: New aircraft technologies. Part 5. Optimal fuselage
By Bjorn Fehrm
March 24, 2023, ©. Leeham News: This is a summary of the article New aircraft technologies. Part 5P. Optimal fuselage. The article discusses different cross-sections and how these drive drag and weight. The cross-section chosen depends on the container type employed for the area below the floor.
Figure 1. Cross sections using different size cargo containers. Source: Leeham Co.
Bjorn’s Corner: New aircraft technologies. Part 5P. Optimal fuselage
Subscription required
By Bjorn Fehrm
March 24, 2023, ©. Leeham News: This is a complementary article to Part 5. Optimal fuselage. It discusses in detail the optimal fuselage for an airliner with 250 seats using different architectures and building methods.
Bjorn’s Corner: New aircraft technologies. Part 4. Fuselage trades
By Bjorn Fehrm
March 17, 2023, ©. Leeham News: This is a summary of the article New aircraft technologies. Part 4P. Fuselage trades. In the article, we discuss the trade-offs involved in designing a fuselage of an airliner with 250 seats using different architectures.
We examine what parameters decide the performance of an aircraft and how fuselage changes like single aisle versus dual aisle affect these parameters.
Figure 1. induced drag comes from the global air circulation from the bottom to the top of the aircraft. Source: Leeham Co.
Bjorn’s Corner: New aircraft technologies. Part 4P. Fuselage trades
Subscription required
March 17, 2023, ©. Leeham News: This is a complementary article to New aircraft technologies. Part 4. Fuselage trades. It discussed in detail the trades involved in designing a fuselage of an airliner with 250 seats using different architectures.