Air France May Drop A380s: Bloomberg reports that Air France may cut back its orders for the Airbus A380s. This continues the challenge of Very Large Aircraft sector sales. Boeing has cut production rates twice for its 747-8. The Los Angeles Times has this story about the eventual demise of the 747-8.
Boeing Everett History: Airchive has Part 3 of its history of Boeing’s Everett plant here. This covers the 777 and what especially caught our eye was the photo of the model of the 777-200 with folding wings, a concept that didn’t go into production. The new 777X will have folding wings. The difference is that the 777-200 concept included the outboard control surfaces, which highly complicated the matter. The 777X folding wings are beyond the control surfaces.
BBD, EMB miss targets: Bombardier missed its earnings estimates on fewer deliveries than analysts expected for the third quarter. Here is the press release.
On the Bombardier earnings call, officials didn’t address whether there will be a delay in the entry-into-service, planned for about 12 months after the September 16 first flight. Only four test flights have occurred, and UBS aerospace analyst David Strauss estimates that the program needs to fly an average of 1.8 hours a day to meet this timeline. Flight Test Vehicle #2 is “weeks away” from entering service.
Pierre Beaudoin, president and CEO, says that some customers are considering swapping the CS100 for the larger CS300, which could influence EIS. He added that discussions with customers about schedules, and the pace of ramp-up of production, are factors to be considered for EIS. “We will answer this question in the next few months.”
He said the flight test results so far are “exactly” as planned, but data won’t be shared with customers for some time. Beaudoin said that the pace of the flight tests are also as planned, and that there hasn’t been a delay despite the perception.
Embraer also missed its 3Q targets and likewise reported lower earnings. Here is its press release.
Posted on October 31, 2013 by Scott Hamilton
The Seattle Times, Reuters and others are reporting that Boeing has decided to assign 777X engineering outside the State of Washington.
The news went down like the proverbial lead balloon in Seattle. The fear, of course, is that this is a precursor of locating the Final Assembly Line away from Everett, to either Charleston or the “undisclosed location” that is also said to be under consideration, which is thought to be Texas.
Boeing hasn’t ruled out doing engineering work in Seattle, but Boeing has been moving engineering jobs out of Washington all year as it clearly works to diminish the influence of SPEEA, the engineers’ union.
SPEEA Tweeted in response to The Seattle Times story, “This would appear to be work that had been outsourced on the 787 program…..not work being moved out of Puget Sound.”
We think this is an ominous development for Washington, but at the same time it could well be another of Boeing’s masterful chess game to extract incentives from Washington, South Carolina or the undisclosed state.
Update: The Wall Street Journal has this story. The WSJ broke the news.
This WSJ story from April is worth re-reading.
Posted on October 30, 2013 by Scott Hamilton
Aviation Week has a long, detailed story about the test program for the CFM LEAP engine, which is accelerating rapidly.
In its 737 MAX program update yesterday, Boeing said the LEAP-1B has begun testing and it will benefit from the testing already underway for the LEAP-1A, the version that is designed for the Airbus A320neo family. The LEAP-1C for the COMAC C919 is on its original schedule for certification in 2015, despite the fact the C919 has slipped to at least 2017, reports AvWeek.
The 737 MAX is exclusively powered by the LEAP, as is the C919. The former has more than 1,600 firm orders and the latter just hit its 400th order/commitment. CFM faces competition on the A320neo family from Pratt & Whitney’s P1000G Geared Turbo Fan, where PW holds a 49% market share against CFM, which previously held a larger, more dominate position in the A320ceo competition. A large number of orders don’t yet have an engine selection.
PW is the sole-source engine provider for the Bombardier CSeries, the Mitsubishi MRJ and the Embraer E-Jet E2. PW splits the engine choice on the Irkut MC-21 (soon to be renamed the YAK 242) with a Russian engine.
Just as Boeing’s LEAP-1B will benefit from the experience of the LEAP-1A now in testing for Airbus, Airbus will benefit from the testing and experience of PW’s testing of the GTF on the Bombardier CSeries.
Aviation Week also has a story about the Airbus A350-800 with the blunt headline, The airplane Airbus doesn’t want to build. This refers to the A350-800. AvWeek muses that the outcome of the merger between US Airways, now the largest customer for the airplane, and American Airlines, may be the deciding factor for the airplane. We agree. With American’s large order for the Boeing 787-9, the A350-800 would be unnecessary.
That would then leave Hawaiian Airlines as a key decision-maker. We hear in the market that Hawaiian is just sitting back and waiting to see what kind of incentives Airbus will offer to entice a switch to the larger A350-900.
Posted on October 30, 2013 by Scott Hamilton
Airbus, American Airlines, Boeing, CFM, Comac, CSeries, Embraer, Irkut, US Airways, YAK
737 MAX, A320NEO, A350, A350-800, A350-900, Airbus, American Airlines, Boeing, C919, CFM, Comac, E-Jet E2, Embraer, GTF, Hawaiian Airlines, Irkut, LEAP, MC-21, Mitsubishi, Mitsubishi MRJ, Pratt & Whitney, Pure Power, US Airways, YAK, Yak-242
Boeing today gave an update for the 737 MAX program. Keith Leverkuhn, VP of Program Manager, provided the briefing. Michael Teal, chief project engineer, was also on the call. The highlights, paraphrased:
KL:: We’ve had firm systems definition, firm design definition.
MT: We see airplane having an 8% operating cost per seat over competition.
KL: With the recent audit numbers coming in and the 14% fuel efficiency, and continuing to make progress and pulling delivery date from 4Q to 3Q 2017, the MAX just keeps getting better.
Q&A
Posted on October 29, 2013 by Scott Hamilton
Airbus and Boeing have announced production rates for their single-aisle airplanes of 42/mo each and are thinking of going as high as 52/mo. Boeing last week announced a planned rate of 14/mo for the 787. Airbus has plans for 10/mo for the A350 XWB, and is considering a second final assembly line.
Bombardier, Embraer, COMAC, Irkut, and Mitsubishi each have new airplanes coming on line soon. There are more than 22 new and derivative airplanes planned to enter service between now and 2022.
How will the supply chain meet the demands of the OEMs?
It will be tough, says J. C. Hall, the chairman of the Pacific Northwest Aerospace Alliance, headquartered in the Seattle area. PNAA represents small-to-medium suppliers.
We sat down with Hall to get his take on the challenges ahead for the supply chain.
[youtube=http://www.youtube.com/watch?v=YdB2i97XsM0&w=560&h=315]
Posted on October 28, 2013 by Scott Hamilton
The decision where to site the Boeing 777X Final Assembly Line–Everett (WA), where the current 777 is built, or Charleston (SC), where Boeing is rapidly acquiring land and shifting work from Washington–will boil down to tactical or strategic considerations, says the chairman of a suppliers trade group.
It’s 50/50 whether Washington will be selected, says J. C. Hall, chairman of the Pacific Northwest Aerospace Alliance. PNAA represents small- to medium suppliers in the Pacific Northwest, with concentration in Puget Sound around the Boeing plants in Everett and Renton.
We spoke with Hall today, with plans to post the interview tomorrow. But today The Wall Street Journal posted a story about this topic, so we’re advancing the posting. Jon Ostrower wrote:
Boeing is now evaluating using the South Carolina plant for both final assembly of the 777X and to build the jet’s new carbon-fiber composite wings, according to two industry officials briefed on Boeing’s development of the 777X. “South Carolina looks more and more promising.”
And:
The South Carolina plant has had some hitches. Boeing initially planned to be building three 787s a month by the end of this year, but the new site wasn’t prepared to make that jump and the company now expects to build two to three 787s a month there by year-end. The Everett plant will build eight 787 a month by year’s end, relying further on its twin assembly lines. Boeing announced Wednesday it would accelerate total 787 production to 12 a month in 2016 and 14 a month before the end of the decade.
We’ve previously written that our market intelligence tells us Boeing Commercial Airplanes wants to build the 777X in Everett but that Boeing Chicago (i.e, headquarters) seems to favor Charleston.
[youtube=http://www.youtube.com/watch?v=RJ5MotPlUu4&w=420&h=315]
Posted on October 28, 2013 by Scott Hamilton
Alaska Airlines is the latest carrier to order the Aviation Partners Boeing Scimitar split winglets. Here is the press release. United Airlines was the launch customer for the Scimitar.
Alaska Airlines image.
The Scimitar provides additional fuel burn savings over the blended winglet, also created by APB. The blended winglet has been retrofitted to most Boeing 737NGs, some Classics and some Boeing 757s and 767-300ERs.
Boeing has adopted a split winglet for the 737 MAX, but of its own design, which is similar in look to the APB Scimitar. APB’s cost for the Scimitar is a list price of $545,000 for the 737-800-3, a designation for the Scimitary-equipped 737-800.
Range increase in nominal over the blended winglet, according to APB.
Here are APB’s charts showing the advantage of the Scimitar over the blended winglets:
737-800-3
.
.
737-900ER
.
Posted on October 28, 2013 by Scott Hamilton
MC-21 to be renamed: After creating a brand for the Russian Irkut MC-21, authorities have decided to rename the airplane the Yak 242, according to this article in Flight International.
The article is too brief to explain the reasons behind this, other than to indicate the MC-21 evolved out of a design that was designated Yak-242. The MC-21 is somewhat larger than the 242 and it is a direct challenger to Airbus and Boeing in the 150-210 seat sector.
Among our activities, we engage in branding. We don’t think this is a particularly smart move on Russia’s part. Returning to the Yak name is a throwback to the old Soviet Union and the history of Soviet airliners that left a lot to be desired. The “Irkut MC-21” name creates some distance to this history in the effort to sell the airplane outside the old Soviet political sphere.
The Sukhoi Superjet SSJ100, which has had some success selling beyond the sphere, nonetheless reinforces the history of troubled Soviet airliners. Production has been painfully slow and in-service reliability difficult.
We think the Irkut name should be retained, a move toward the future, not one toward the past.
Boeing buys more Charleston land: The US government shutdown delayed the land purchased by Boeing of federally property around the Charleston (SC) airport. Now that the government is open again, the purchase has moved forward, according to the Charleston Post and Courier. According to reports, Boeing now owns or has under contract slightly more land at Charleston than it owns at Everett.
Boeing has been shifting work from Washington to Charleston, and the trend toward purchasing land means this will continue. We continue to believe that when clean-sheet airplanes come out of the Boeing shop to replace the 737 and 777, production of these will be at Charleston. Hopefully the demand for the 737 replacement will be high enough that production will be split between Washington and Charleston. We can foresee a scenario where Boeing has a more equal split between the two locations, such as Airbus has with Hamburg and Toulouse.
But the immediate question is whether the 777X derivative will be built in Washington or Charleston. We’ve heard both scenarios but don’t have enough information to know which is correct.
Seats Wars pending? Airbus has called for an industry standard for 18-inch wide seats in coach. Plane Talking has an analysis of this. We’ll point out that Embraer already has 18-inch seats as standard in its E-Jets and Bombardier has 18-inch window-and-aisle seats plus a 19-inch middle seat for its CSeries. This makes the E-Jet and the CSeries the most comfortable domestic airplanes available, with the middle-seat bonus for the CSeries.
We haven’t flown coach internationally for years, but we do so domestically and have been crabbing about the 17 inch seat on the Boeing 737 for a long time. With the Airbus A330 and Boeing 777 nine-abreast essentially the same width, we believe airlines and their drive toward cramming as many seats in as possible to the total disregard of passenger comfort certainly merits international standards at 18 inches.
But we’re not deceived that this proposal is altruistic on the part of Airbus. Boeing’s ability to accommodate one more row of seats with a slightly wider standard than Airbus, reducing CASM in the process, is clearly the motive. When Boeing compares today’s 777 against the A350 in sales campaigns, it uses 10 abreast in coach vs nine abreast for the A350 and argues superior CASM costs. Customers tell us this indeed reduces the CASM advantage the A350 has at an apples-to-apples 9 v 9 (the A350 continues to maintain a trip cost advantage).
We agree with Airbus on the principal. But far chance it will happen.
Boeing’s MAX to China: The absence has been conspicuous, but no more: China will take 200 737 MAXes, according to Reuters. It will be interesting to see what delivery slots becoe available. Boeing always holds open some slots for key customers, but the real opportunity is boosting production, as Boeing CEO Jim McNerney alluded to on this week’s earnings call and which we reported back in June. We’re looking for 737 rates to hit 47/mo by the time the MAX enters service in 2017 and 52/mo two years later. This will open slots for China and other customers that otherwise aren’t available until 2020.
Airbus sees growth: Fabrice Bregier sees no order bubble because the company expects annual passenger growth of 5%, reports USA Today. The comments come on top of Airbus’ USA suppliers conference.
Boeing’s wide-body dominance: Boeing has for decades dominated the wide-body market in its rivalry with Airbus, but this has narrowed to parity this year. Aspire Aviation has a long analysis (best printed out) concluding that Boeing’s dominance depends on the success of the 777X.
Bombardier’s risk: CEO Pierre Beaudoin gives his thoughts about the risk BBD is taking with the CSeries, in this interview in Maclean’s.
Posted on October 25, 2013 by Scott Hamilton
With the launch of the Boeing 777X expected to be approved this month by the Boeing Board of Directors, followed by the public launch at the Dubai Air Show next month, the future sales of the in-production 777 will be closely watched by the industry as well as by Boeing itself.
It is conventional wisdom that sales will fall off as entry-into-service nears for the 777-9X, said to be “late this decade” by Boeing but more likely 2020 or even 2021, according to customers.
Sales of the Airbus A320ceo and Boeing 737NG families have, so far, held up surprisingly well despite the launch in 2010 of the A320neo and in 2011 of the 737 MAX families. Most of the neo and MAX orders have been combined with the current generation aircraft. This has been viewed as a way to keep the production lines full in advance of the EIS of the new airplanes.
Further, Airbus and Boeing plan an overlap of production of the two generations of about two years. This contrasts with Boeing’s decision to cease production of the 737-300/400/500 concurrent with the launch of production of the 737NG, a move Boeing today says was an arbitrary choice.
Boeing plans to begin building the MAX on a third line in its primary Renton (WA) factory before phasing out the NG. Airbus hasn’t specified how it plans to integrate the production of the ceo and neo.
What will happen for the current Airbus A330 and Boeing 777 lines as the A350 and 777X come on line?
Posted on October 24, 2013 by Scott Hamilton