Leeham News and Analysis
There's more to real news than a news release.
Leeham News and Analysis
- Bjorn’s Corner: Air Transport’s route to 2050. Part 21. May 9, 2025
- Does an A220-500 need a new wing and engines? Part 2. May 8, 2025
- Embraer downplays tariff impact on 2025 results May 6, 2025
- JetZero readies effort for private equity fund raising May 5, 2025
- Bjorn’s Corner: Air Transport’s route to 2050. Part 20. May 2, 2025
Pontifications: New Rolls-Royce CEO paints a dire picture; all scenarios on table at Airbus
By Scott Hamilton
Jan. 31, 2023, © Leeham News: Rolls-Royce’s new CEO says the engine group is a “burning platform,” failing to give returns.
Tufan Erginbilgic, who joined RR as CEO on Jan. 1, said this is the “last chance” to get its house in order and turn a profit.
The dire outlook has potentially disastrous implications for Airbus. The airframer relies exclusively on Rolls for its engines for the A350 and A330neo. Airbus is monitoring the situation closely. Market sources tell LNA that Airbus is assuring customers and potential customers that Airbus will make sure engines and aftermarket support are available, without detailing how.
An Airbus insider tells LNA that all scenarios are under consideration. Some speculate that Airbus might either provide financial support to Rolls or even, in the extreme, buy the engine company. Others believe either course is unlikely because Airbus has its own production problems to sort out. Its fiduciary duty is to its stockholders. “It’s not their job to inherit a problem that was created decades ago,” one London-based analyst says.
What’s at the root of RR’s current problems? Many of the reasons have been discussed before, but let’s summarize them.
Boeing to add 4th 737 FAL at underutilized Everett plant
Subscription Required
By Scott Hamilton
Jan. 30, 2023, © Leeham News: Boeing will establish a fourth final assembly line (FAL) for the 737 in the vast Everett (WA) assembly plant in 2024. The company announced the move internally today.
Boeing Everett plant, where all widebody aircraft are assembled. Boeing will add a narrowbody 737 line. Credit: Everett Herald
The move was one of many rumored for months. Consolidating the 787 FALs in Charleston (SC), a move announced in the early days of the COVID pandemic, and shutting down 747 production, announced two years ago, the future of the big, empty spaces at Everett was a question. When Boeing was studying whether to launch a New Midmarket Airplane (NMA), Everett was on the list for an FAL (as were other places). But when CEO David Calhoun killed this program, more questions arose.
Rework on the 787 temporarily filled the 787 bay and now, part of the 747 space. But this was hardly enough.
LNA has obtained production rate studies Boeing shared with suppliers for the future. Conceivably, the aggressive numbers could be accommodated at the 737 plants in Renton (WA), but there is more to consider than raw production numbers.
Summary
- Boeing has a lot of skilled workers in Everett who are losing their assignments when the 787 rework is completed (target: year-end 2024) and with the cessation of 747 production. These skilled workers need replacement work.
- Boeing needs to keep up with the Joneses (aka Airbus). Boeing is studying very high 737 production rates.
- There is no new airplane program for Everett and a lot of empty space.
- Everett’s overhead absorption rate is now covered by just the 767 and 777 at very low rates and rework.
Repost: Exclusive Interview with Joe Sutter’s grandson as Last Boeing 747 leaves Everett factory
Update, Jan. 30, 2023: The last Boeing 747 will be delivered to Atlas Air tomorrow. Below is the story LNA posted on Dec. 6, 2022, when the airplane was ready to roll out of the Everett factory. In it, we exclusively interviewed the grandson of Joe Sutter, the lead engineer of the 747 design.
Cargo carrier Atlas Air is taking the final 747-8Fs, the last of a legendary line of Boeing jumbo jets./Atlas Air photo
By Bryan Corliss
Dec. 6, 2022, © Leeham News: The final Boeing 747, line No. 1,574, rolls out of Boeing’s Everett factory tonight. The plane was built for Atlas Air, which is scheduled to take delivery in early 2023 – almost 52 years after the first 747 entered service with Pan Am in January 1970.
“It’s kind of a sad occasion,” said Jon Sutter, the grandson of legendary Boeing aircraft designer Joe Sutter, the father of the 747.
Jon Sutter – who now works at Boeing in the same Boeing Field building where his grandfather designed the Queen of the Skies – hadn’t been born when the first 747 flew.
And his grandfather, who passed away in 2016, didn’t live to see the end of the program he’s most closely associated with.
However, even with the end of the 747 program, Joe Sutter’s legacy lives on, his grandson said.
“His baby, Boeing, is still going,” Jon Sutter said in a recent interview with LNA. “You can see his influence in every other plane out there.”
SUMMARY:
- First-flight pilots called it a “two-finger” airplane
- 747 was Plan B after SST was canceled
- Last 747s sport special decal honoring Sutter
- 747 survived the Boeing Bust
- 747-8 was final iteration
- ‘Hard to imagine the world without it’
Read more
The Airbus A220-500, a deep-dive analysis: The launch date challenge
Subscription required
By Bjorn Fehrm and Vincent Valery
Jan. 30, 2023, © Leeham News: In the previous articles, demand in the Airbus A320 family gradually shifted from the smaller A319 and A320 to the larger A321. This shift is laying the groundwork for the arrival of the A220-500.
Airbus can develop the A220-500 with relatively minor technical modifications that are not extremely challenging. In an aircraft performance analysis, we saw that the light aircraft weight gave the A220-500 an advantage against the A320neo and 737-8.
What is then preventing Airbus from launching the A220-500 now? While most of the attention has been on the cannibalization risk with the A320neo and the lack of urgency given Airbus’ market share lead, other and more critical factors, in LNA’s opinion, are at play.
Being an aircraft OEM is not just about designing airplanes that meet payload-range requirements and satisfy stringent safety regulations. It is also about efficiently building aircraft with millions of parts and consistent production rates. The recent challenges OEMs are facing ramping up after the Covid-19 pandemic show that aircraft production is far from a walk in the park that can be taken for granted.
It is common for aircraft OEMs to spend as much cash nursing production through the learning curve until the first profitable delivery as developing the aircraft itself.
The final article on this A220-500 series discusses why Airbus is rightfully cautious about launching the new variant.
Figure 1. A rendering of an A220-500 that takes 157 passengers. Source; Leeham Co.
Summary
- Current planned A220 production rates and variants can satisfy demand;
- Adding the A220-500 brings the program to a new demand level;
- Several clients would place large A220-500 orders;
Hexcel reports increased demand for aerospace composites as industry rebounds
By Bryan Corliss
Jan. 27, 2023, © Leeham News: Composites materials supplier Hexcel Corp. reported that its fourth-quarter sales were up 29% over the same period last year, driven by increased demand from all across the aerospace industry.
“Virtually every platform from narrowbody to widebody to business jets is growing, and the customers continue to ramp as fast as the supply chain allows,” CEO Nick Stanage said.
As international air travel recovers, airlines are seeking more widebody jets, which is good for Hexcel, because newer widebodies have higher percentages of composite materials, Hexcel executives told investment analysts. However, new business jet and military aircraft models also incorporate higher percentages of composites.
Stanage and Hexcel CFO Patrick Winterlich noted that their company is not immune from the inflation and labor issues facing most manufacturers, but said they’re coping.
“You can’t give someone five years, three years, of experience in six months or nine months,” Stanage said. “We are working as hard and are focused as hard as we can on training and accelerating it.”
- Hexcel profits beat Wall Street expectations
- Analysts: Can Hexcel match Boeing ramp-up?
- CEO: Commercial aerospace can withstand recession
Read more
Bjorn’s Corner: Sustainable Air Transport. Part 55. Sustainable Aviation Fuel feedstocks
By Bjorn Fehrm
January 27, 2023, ©. Leeham News: Last week, we learned the main pathways to Sustainable Aviation Fuel and their production volumes for the next years.
Now we look at the feedstocks, what output we get from these, and how to safeguard the pathway is ethical and sustainable. Finally, we look at the cost of SAF until 2050.
Figure 1. The main pathways to SAF. Source: Clean Skies for Tomorrow report. Click to enlarge.
The Airbus A220-500, a deep-dive analysis, Part 2
Subscription required
By Bjorn Fehrm
Jan. 23, 2023, © Leeham News: Following Thursday’s article about an up-and-coming Airbus A220-500, we now look at the operational cost for the A220-500 and compare it with the A320neo it should replace.
We put the data we discussed in Thursday’s article in our Aircraft Performance and Cost model, fly the aircraft on a typical single-aisle mission and look at the results.
Figure 1. A rendering of an A220-500 that takes 157 passengers. Source; Leeham Co.
Summary:
- The A220-500 would be a viable replacement for an A320neo.
- With the changes/improvements we discussed, it beats the A320neo on operational costs. The differences are not of the speculated level, however.
Update 2: Boeing pauses remarketing China’s airplanes, outlines prerequisite for a new airplane program. Update 1: Calhoun feels good despite earnings miss; Boeing reports 4Q, full year loss but financial progress continues
Jan. 25, 2023, © Leeham News: The Boeing Co. recorded a net loss in 4Q022 and for the full year while reporting positive cash flow. There were no one-time charges, the first time in many 
quarters—a key metric some Wall Street analysts were watching for. Long-term debt declined by 10% as current debt increased. Negative stock equity increased. Cash and marketable securities increased slightly.
- Cash increased to $14.6bn from $8bn year over year. Marketable securities decreased to $2.6bn from $8.2bn.
- Advances and progress billings (deposits and progress payments) were essentially flat: $53.1bn vs $52.98bn.
- Short-term debt (that is due within 12 months) increased to $5.2bn from $1.3bn.
- Long-term debt declined from %51.8bn from $56.8bn.
- The shareholders’ deficit increased to $15.88bn from $15bn.
- Free cash flow was $3.1bn for the quarter and $2.3bn for the year.
- Revenues for the quarter were $19.98bn vs $14.79bn and $66.6bn vs $62.286bn for the year.
- Operating loss was $353m vs a loss of $4.2bn for the quarter and $3.5bn vs $2.9bn for the year.
- Net loss was $663m vs a loss of $4.16bn for the quarter and $5bn vs $4.3bn for the year.
The full press release is here.
CEO Dave Calhoun said challenges remain to achieve production stability and within the supply chain.
GE, Raytheon report orders surges, but labor and supply chain headwinds
By Bryan Corliss
Jan. 24, 2023, © Leeham News – Aerospace suppliers GE and Raytheon both reported fourth-quarter sales surges, as the commercial aviation industry continued its recovery from the worst of the Covid pandemic.
Both companies also project strong sales growth in 2023, but warned investors that there are lingering supply chain issues and labor shortages that could hold them back.
“While we are broadly beginning to see our supply chain improve, it is not yet at the levels we need,” Raytheon CFO Chris Calio told stock analysts during the company’s fourth-quarter earnings call on Tuesday. “We are assuming a recovery as we move into the back half of the year.”
- GE reports backlog near 10,000 for LEAP
- Raytheon expects double-digit growth for Collins, P&W
- Supply chain improving, but still tangled
- Raytheon talks about Boeing, Airbus rates
Read more
Pontifications: Do you really want the Jetsons zipping around?
By Scott Hamilton
Jan. 24, 2023, © Leeham News: “For those of you old enough to remember, this is the Jetsons. This is the dream. This is what everybody would love to do.”
This cartoon is what former Boeing CEO Phil Condit used to segway into the hot topic of Urban Air Mobility vehicles (UAM). A cartoon is an apt illustration of UAMs.
Related articles
You walk out your front door, climb into the vehicle, and off you go. “All of a sudden, it looks like you can do that,” Condit said. Condit made his remarks on Jan. 9 at the University of Washington aerospace class.
Today’s Urban Air Mobility concepts hark back to the 1960s cartoon series, The Jetsons.
There is a concept called Air One, a battery-powered two-place UAM that has folding wings and a folding structure for the rotors. It fits in the garage. It uses a landing pad in front of the house. “This is a step to the Jetsons. What’s the problem?” Condit posited. “Well, there are a number of them.”
The advertisement shows Air One has 771 horsepower and a 96nm range. Reserves aren’t mentioned. A competing concept called Icon A5 shows 100hp, a range of 427nm, and a 45-minute reserve. This has wings to carry the lift. “Taking off vertically is not cheap. Wings are way more efficient than vertical lift.”
Condit pointed out that Air One suggests you could fly to a favorite fishing spot. But, Condit said, “unless your fishing spot has a charging port, I’ve got two vertical take-offs and two vertical landings. I have a net effective range of 30 miles. So, your fishing spot has to be within 30 miles.”