Leeham News and Analysis
There's more to real news than a news release.
Leeham News and Analysis
- Bjorn’s Corner: Air Transport’s route to 2050. Part 20. May 2, 2025
- Supplier Howmet exceeds expectations despite tariffs May 1, 2025
- Airbus 1Q2025 results: So far, so good, but US tariffs make future results unpredictable May 1, 2025
- Does an Airbus A220-500 need a new wing and engines? May 1, 2025
- Teamsters, Boeing have a new contract April 29, 2025
Pontifications: 787-10 engines too small for Emirates
By Scott Hamilton
Feb. 4, 2019, © Leeham News: There is more to Emirates Airline’s renewed its interest in the Airbus A350 and the potential swap-out of Airbus A380 orders than meets the eye.
The Airfinance Journal Dublin conference is worth attending for the program, but the real news is often generated on the sidelines. This is where I picked up noise about the Emirates interest in swapping the A350 for the A380.
The renewed interest, and growing disaffection with the A380 (over the engine issues) was part of it.
But Emirates’ interest in the A350 stems more from a realization the Boeing 787-10 won’t do the job the airline wants, according to the sideline conversation at the conference.
Boeing’s 777X analyzed, Part 2
By Bjorn Fehrm
Subscription Required
Introduction
January 30, 2019, © Leeham News: We started an analysis of the Boeing 777X last week as its rollout and first flight should happen this spring/summer. In the Figure below, the first flight test aircraft has its engine mounted, before roll out.
We will spend this article on the 777X engines, the GE9X from GE Aviation. Surprisingly, these are less powerful than the GE90 engines on the Boeing 777-300ER, the aircraft the 777X is derived from, despite the 777-9 being larger and heavier than the -300ER. This is with intent. The design of the 777X is to achieve more with less. We reveal how this is done below.
Figure 1.
Summary:
- The Boeing 777-9 is larger and heavier than the 777 variant it replaces, the Boeing 777-300ER.
- Despite this, the GE9X engines on the 777-9 are specified with 10,00lbf lower maximum thrust than the GE90-115 on the 777-300ER.
- How does it all work? We reveal how below.
Forget the NMA, go after A321–say ex-Airbus exec
Jan. 29, 2019, © Leeham News: Boeing should forego the New Midmarket Aircraft and instead create a new single aisle airplane targeting the Airbus A321, former Airbus COO-Customers John Leahy said.
Leahy, who was Airbus’ top salesman for more than two decades and the opponent Boeing loved to hate, said Boeing is pursuing the wrong market with the NMA.
Leahy made his remarks at the Airfinance Journal Dublin Conference last week.
Too many orders? Yes, says consultant. No, says ex-super-salesman
Jan. 28, 2019, © Leeham News: There are too many airliner orders for the future demand, says a leading aviation consultant.
John Leahy. Airbus photo.
No, there aren’t, says the leading industry salesman, now retired.
These opposing views emerged at the Airfinance Journal Dublin conference last week.
Adam Pilarski, the consultant from the US firm Avitas, said a recession is on the horizon.
John Leahy, the former COO Customers from Airbus, said overbooking orders is a good thing.
UTC-Collins merger creates super-supplier
Subscriptions Required
By Bryan Corliss
Jan. 28, 2019, © Leeham News: You might have missed it over the holidays, but something happened about the time you polished off the last of your Thanksgiving leftovers that just might have changed the balance of power between the major players in our industry.
That something was the closing of the merger between United Technologies Corp. and Rockwell Collins.
The deal, which formally closed on Nov. 26, created a new super-supplier that rivals Boeing’s Commercial Airplane division in size, outstrips it in terms of profitability and has the potential to upset the multi-tiered supply chain pyramid the industry has grown used to over the past few decades.
Pontificatons: From the sidelines at the AFJ Dublin conference
By Scott Hamilton
Jan. 28, 2019, © Leeham News: Launch by Boeing of the New Midmarket Aircraft (NMA) is pretty much a given, despite a still undecided business case, say people on the sidelines of the Airfinance Journal’s Dublin 2019 conference.
Here is a potpourri of information picked up at the conference, which is attended by about 2,000 people.
Read more
Boeing’s 777X analyzed
By Bjorn Fehrm
Subscription Required
Introduction
January 24, 2019, © Leeham News: Boeing will roll out the first 777X flight test aircraft mid-spring. The first aircraft, the static test airframe, was rolled out in September. Flight-testing should start in the early summer and first delivery is expected mid-2020.
With certification and delivery 18 months away it’s time to look at the project and understand where the 777X positions itself versus the competition.
Figure 1. First flight test Boeing 777-9 with the GE9X engines mounted. Source: Boeing.
Summary:
- The 777X achieves better fuel consumption per seat despite a larger and heavier airframe thanks to more advanced wings and engines.
- We compare its design to the 777-300ER and the Airbus A350-1000 competitor.
Look at entire portfolio when investing in sub-types, Airbus and Boeing say
Jan. 23, 2019, © Leeham News, Dublin: Investors and lessors should take into account the entire product line offered by Airbus and Boeing when considering sub-types that may 
have few sales to date, officials of the two companies said at the annual conference in Dublin organized by Airfinance Journal.
Tim Myers, president of Boeing Capital Corp., and Mark Pearman-Wright, Head of Leasing & Investor Marketing for Airbus, said the 737-7, 737-9, 737-10, A319neo, A321LR, A330-800 and the new 777X should be looked at in context of the entire 737, A320, A330 and 777 lines when making investment decisions.
Read more
Additive manufacturing explained
By Anna Kucirkova
Special to Leeham News
Introduction
Jan. 22, 2019, © Leeham News: A lot of changes have taken place in the manufacturing industry over the years.
Anna Kucirkova
Just a few decades ago, the concept of manufacturing products from your home seemed impossible. If you wanted a product, then you had to purchase it or request a company to produce it for you.
Now you can purchase a machine, set it in your house and produce what you desire with the help of a computer. What used to cost manufacturing firms huge capital can now be built at a lower price in your home.
So what changed? This article will explore some notable changes that have shaped the manufacturing industry to where it is today.
Pontifications: The Airbus North America Tour
By Scott Hamilton
Jan. 21, 2019, © Leeham News: Last week’s Airbus North America Tour (#AirbusNATour on Twitter) was a whirlwind 2 ½ days encompassing Montreal Mirabel, Columbus (MS) and Mobile (AL).
To those who don’t follow Airbus Americas closely, the Mississippi stop might be a puzzle. I’ll come back to this to explain why an international group of media, including me, made this trek.
Let’s start with Montreal.
Read more
6 Comments
Posted on January 21, 2019 by Scott Hamilton
Airbus, Airfinance Journal, Bombardier, CSeries, Leeham News and Analysis, Leeham News and Comment, Pontifications
A220, A319, Air Canada, Airbus, Airbus helicopters, Alain Bellemare, Bombardier, C Series, Leeham News and Analysis, MRTT