Leeham News and Analysis
There's more to real news than a news release.
Leeham News and Analysis
- GE testing of giant GE9X engine aims for maturity at entry into service June 30, 2025
- Bjorn’s Corner: Air Transport’s route to 2050. Part 28. June 27, 2025
- Parent agency, FAA often at odds as politics outweighs safety June 26, 2025
- Electric Flight and the Ugly Duckling June 25, 2025
- Engine makers tout “Plan A” but have “Plan B” backups in R&D June 23, 2025
Latest engine problem means NMA EIS slides
Subscription Required
Introduction
April 22, 2019, © Leeham News: If there remains any doubt that Boeing’s prospective New Midmarket Airplane (NMA) won’t be ready for entry into service (EIS) by 2025, it should be dispelled by now.
The grounding of the 737 MAX March 13, which is likely to continue well into the summer, will delay any launch of the program—should Boeing proceed.
The Board of Directors is unlikely to approve Authority to Offer (ATO) the NMA for sale as long as the cash flow for the MAX is outgoing and not in-coming.
Although this has its own impact on the NMA timing, it’s not the critical factor.
Last week, it was revealed that the CFM LEAP engine on the MAX (and the Airbus A321neo) has a problem called coking, which led to the contained engine failure of a Southwest Airlines MAX being ferried from Orlando (FL) to Victorville (CA) for the grounding of the Boeing airplane (see here and here). It’s the latest in a long line of engine maker problems with their current generation of powerplants.
This issue is unrelated to the MAX MCAS grounding. It also affects some engines on the A320neo family.
Summary
Delta Tech Ops 5-year goal to double revenues
#MROAM
Ed Bastian, Delta Air Lines CEO.
April 9, 2019, © Leeham News: Delta Air Lines has the third largest third-party MRO company in North America and aggressively seeks to grow, in sharp contrast to its competitors.
While American and United airlines have limited their own maintenance, repair and overhaul, let alone seek third party business, Delta Tech Ops is a business unit and profit center. Delta CEO Ed Bastian said today that Tech Ops will achieve $1bn in revenues this year and has a goal of $2bn within five years.
Bastian was the lead-off speaker at the Aviation Week MRO Americas conference in Atlanta this week.
Cutting A220 costs is an ‘ongoing exercise’ for Airbus
Subscription required
Introduction
March 14, 2019, © Leeham News: Airbus’ effort to slash supply costs for A220 production is “an ongoing exercise at this point,” Joe Marcheschi, Airbus’ head of procurement in North America, told LNA in an interview last month.
The A220-300 for JetBlue will be assembled at the Airbus plant in Mobile (AL). Airbus rendering.
“There are no specific, let’s say, achievements yet,” he said. “We are working closely with our supply chain.”
It takes time to squeeze cost out of the supply chain, he said. “We only took over July 1. That’s when we got full knowledge of the existing contracts.”
In January, Philippe Balducchi, head of the Airbus-led venture overseeing production, told journalists that the aerospace giant aims to realize “significant double-digit” percentage cost reduction. He indicated that most of the savings likely would come from the supply chain, according to news reports.
“Look, the airplane is absolutely fantastic—it just costs a lot of money,” Marcheschi said. “Now, we have to find a way to reduce the cost.”
Summary
- Airbus is working to slash supply chain costs on A220 program, but no announcements yet.
- The European plane maker wants to offer commercial MRO services in North America.
Pontifications: Delays, design creep, cost overruns–nope, it’s not an airplane program
By Scott Hamilton
March 11, 2019, © Leeham News: It’s late. There have been creeping delays. There’s been design creep. There were unknown unknowns. It’s way over budget.
No, it’s not a new airplane program, though the parallels are quite apparent.
It’s our new house.
After a three year process, including changing builders, going through the city twice, hitting expensive unknowns and facing rising costs, today is finally, finally, moving day.
It’s been a horrible experience I wouldn’t wish on anyone.
This will sound familiar to Airbus, Boeing, Bombardier, Mitsubishi, Rolls-Royce, Pratt & Whitney and, to a lesser extent, GE and CFM. Only Embraer can say it finished on time and on budget.
Pontifications: Doubts continue over Boeing NMA launch
March 4, 2019, © Leeham News: Another week, another NMA story.
For an airplane that doesn’t exist, the prospective Boeing NMA continues to dominate much of the aerospace news.
By Scott Hamilton
Last week’s announcement by Rolls-Royce that it withdrew—in December, as it turns out—from the competition to power the NMA prompted a flurry of stories in aerospace media, including LNA.
Some stories suggested RR’s withdrawal meant Boeing was getting closer to launching the airplane.
Boeing, in January, said Authority to Offer might come this year and program launch had moved from 2019 to 2020.
Two prominent consultants predicted at the Pacific Northwest Aerospace Alliance conference last month the odds were 60-40 or 65-35 Boeing would proceed.
Maybe, but I have to tell you that conversations I had last week in the wake of the Rolls announcement are not encouraging.
Transcript: RR told Boeing before end of 2018 it’s out of NMA competition
Feb. 28, 2019, © Leeham News: The announcement today by Rolls-Royce that it has withdrawn from the competition to provide an engine for the Boeing New Midmarket Airplane came as a surprise.
Warren East, CEO of Rolls-Royce. Source: Youtube.
This leaves CFM and Pratt & Whitney as the remaining competitors.
RR’s withdrawal wasn’t the only surprise.
CEO Warren East revealed Boeing had been notified shortly before the end of 2018.
Airbus appears poised to launch A321XLR
Subscription Required
Introduction
Feb. 25, 2019, © Leeham News: The longer Boeing dithers on launching the New Midmarket Airplane, the harder it is to close an already difficult 
business case.
News last week that Airbus finally, at long last, is appears about to launch its Xtra Long Range A321XLR this year is overdue. Doing so will make Boeing’s NMA business case more difficult to close.
The aircraft should have been launch in late 2017, an insider told LNA recently. But the corruption scandals enveloping Airbus disrupted plans and drove executives to indecision. Launching the A321XLR was put on hold.
Summary
- Killing the NMA.
- A321XLR details.
- Narrow market.
- Engine down select soon.
Pontifications: March is a critical month for engine OEMs
By Scott Hamilton
Feb. 25, 2019, © Leeham News: Even as Boeing put off a decision whether to launch the New Midmarket Aircraft until 2020, next month could be an important milestone—not only for the program but especially for the engine makers.
Unless delayed, engine down-select is supposed to be made in March.
This is a critical decision that could have huge implications to one of the engine OEMs—Rolls-Royce.
Pontifications: Which airplanes are revolutionary or evolutionary?
By Scott Hamilton
Feb. 18, 2019, © Leeham News: Last week’s column about the revolutionary Boeing 747 prompted some Twitter interaction asking what other commercial airplanes might be considered “revolutionary.”
I have my views. Let’s ask readers.
There are also three polls below the jump in addition to the usual comment section. Polling is open for one week.
Pontifications: 787-10 engines too small for Emirates
By Scott Hamilton
Feb. 4, 2019, © Leeham News: There is more to Emirates Airline’s renewed its interest in the Airbus A350 and the potential swap-out of Airbus A380 orders than meets the eye.
The Airfinance Journal Dublin conference is worth attending for the program, but the real news is often generated on the sidelines. This is where I picked up noise about the Emirates interest in swapping the A350 for the A380.
The renewed interest, and growing disaffection with the A380 (over the engine issues) was part of it.
But Emirates’ interest in the A350 stems more from a realization the Boeing 787-10 won’t do the job the airline wants, according to the sideline conversation at the conference.