Leeham News and Analysis
There's more to real news than a news release.
Leeham News and Analysis
- Bjorn’s Corner: New engine development. Part 5. Turbofan design problems April 26, 2024
- Airbus 1Q2024 results: Airbus CEO: “A350 in-service experience drives positive reputation and orders” April 25, 2024
- A350-1000 or 777-9? Part 3 April 25, 2024
- Boeing CEO promises company is turning around…again April 24, 2024
- Solid start for stand-alone GE Aerospace despite cuts to LEAP output April 23, 2024
Bjorn’s Corner: The Chinese aircraft engine industry
By Bjorn Fehrm
October 07, 2016, ©. Leeham Co: In our Corners on East bloc aeronautical industries, we will now look at the Chinese civil aircraft engine industry.
The Chinese engine industry is closely modeled after the Chinese aircraft industry that we looked at last week. It is organized as divisions and later subsidiaries to the major aircraft companies. Contrary to the Chinese aircraft industry, it has had major problems in gaining the necessary know-how to start developing and producing its own designs.
The industry has built Soviet designs on license since the 1950s and only recently managed to present functional own designs, after many failures.
Russian-Chinese wide-body: Program responsibilities
By Bjorn Fehrm
Subscription required.
Introduction
September 29, 2016, ©. Leeham Co: We will now finish our series about the Russian-Chinese wide-body with looking at who will have what role in the program.
Figure 1. Concept for new wide-body airliner. Source: United Aircraft.
As we described in the initial article, “Background and outlook,” Russia and China have vastly different competencies when it comes to making a state of the art wide-body aircraft.
Russia has made airliners since the 1930s, including wide-body jets. China did not design its own jet aircraft (military or civil) until the mid-1980s. Most of the aircraft produced still today in China have their origin in Russian designs.
At the same time, we saw in the article about the market demand for the aircraft that the Chinese market is 90% of the home market. This makes for China demanding important parts of the aircraft’s production, and China has the money to invest in production facilities.
All this will influence how different parts of the project will be shared between Russia’s United Aircraft Corporation (UAC) and Commercial Aircraft Corporation of China (COMAC).
Summary:
- Russia and China enter the wide-body project with widely different knowledge bases.
- Russia has long time knowledge on how to develop and produce aircraft and their engines.
- China on the other hand has the market for the aircraft.
- China also know a lot about serial production and have money to invest. Read more
Weekly Analyst Synopsis: Rolls, Boeing and leasing companies
Sept. 28, 2016: This week’s aerospace analyst research synopsis looks at Rolls-Royce. aircraft leasing companies and the implications to supply-and-demand, and the Iran Air order clearance by the US for Boeing.
No sanctions will be levied on Airbus and Boeing in WTO dispute
Subscription Required
Now open to all readers.
Introduction
Sept. 26, 2016, © Leeham Co.: It’s hazardous to use the word “never,” but the US and European Union will never impose trade sanctions or tariffs on Airbus or Boeing airplanes.
No sane president would do so. (Cue Donald Trump.) It would start a devastating trade war and the collateral damage on innocents in the Airbus-Boeing illegal subsidies disputes would be severely harmed.
Summary
- US tariffs on Airbus aircraft and EU tariffs on Boeing aircraft would hurt engine makers, suppliers—innocents in the illegal subsidy disputes.
- Some key customers order from Airbus and Boeing. Tariffs on one or the other company risk alienating these customers.
- Sanctions/tariffs permitted on other companies, industries.
- Canada, Brazil never imposed sanctions in Bombard-Embraer violations.
Russian-Chinese wide-body: Aircraft performance
By Bjorn Fehrm
Subscription required.
Introduction
September 19, 2016, ©. Leeham Co: In Part 4 of the article series, we put together an assumed complete Chinese-Russian wide-body aircraft with fuselage, wing, engines, etc. It is now time to understand what kind of performance that can be expected, given the data we have from the wide-body partners, Russia’s United Aircraft Corporation (UAC) and the Commercial Aircraft Corporation of China (COMAC).
Figure 1. Concept for new widebody airliner. Source: United Aircraft.
We will combine these data with the ones we have deduced as plausible to fill the gaps, given the time frame and technology level that UAC and COMAC intend to use.
Out will come a first estimate of what kind of performance such an aircraft can have in terms of efficiency and payload versus range capability.
Summary:
- We can use all the data we have gathered to make a first estimate of the efficiency of the Russian-Chinese wide-body.
- We also have enough information to do a first payload-range diagram and to compare that with the diagram for Boeing’s 787-9.
Russian-Chinese wide-body: The aircraft, Part 4
By Bjorn Fehrm
Subscription required.
Introduction
September 15, 2016, ©. Leeham Co: In Part 3 of this series, we identified the type and size of wing we would have on a new Russian-Chinese wide-body. It’s now time to go through all the considerations around the engines for the aircraft.
Figure 1. Concept for new widebody airliner. Source: United Aircraft.
The aircraft would enter the market around 2025. We would have to decide on what size engine that would be needed, what engines would be available at the time and could this project motivate any new engine developments.
Summary:
- The Russian-Chinese wide-body as outlined would require engines in the size class of the Boeing 787-9/10.
- GE and Rolls-Royce have been mentioned as engine suppliers. The question would be: will they offer updated 787 engines or new designs and will Russia compete with its announced engine project for the aircraft?
Russian-Chinese wide-body; The aircraft Part 3
By Bjorn Fehrm
Subscription required.
Introduction
September 08, 2016, ©. Leeham Co: Having covered the possibilities of reusing parts of the Il-96 fuselage for a new Russian-Chinese wide-body, it’s now time to look at the existing IL-96 wing and how far this is from a modern design.
Figure 1. Concept for new wide-body airliner. Source: United Aircraft.
The intent is not to propose that the existing wing is reused but rather to check the technology level against western designs and how big a leap it will be for the partners to make a modern high performance wing for the aircraft.
Summary:
- The IL-96 wing is roughly on the technological level of the Airbus A340-300 wing with a bit lower aspect ratio.
- The dimensions are close to what is needed for the new wide-body but sweep and aspect ratio needs to be changed for a new wing.
- A wing for a 2025 long range wide-body also need a more modern construction technology than classical aluminum alloys.
Russian-Chinese wide-body: The aircraft, Part 2
By Bjorn Fehrm
Subscription required.
Introduction
September 01, 2016, ©. Leeham Co: In Part 1, we concluded that the existing Il-96 fuselage cross section would be suitable for a new Russian-Chinese wide-body. This means that a lot of experience and existing designs for fuselage sections can be re-used.
Figure 1. Concept for new wide-body airliner. Source: United Aircraft.
Most importantly, it means that mock-ups and cabin sections can be made early in the project to start work on new and better cabin equipment. This is an area where the partners really lag their western competitors.
We will now look at what aircraft capacities can be conceived with the existing Il-96-300 and -400 fuselages and what changes will be necessary to achieve the targeted sizes that Russia’s United Aircraft Corporation (UAC) and Commercial Aircraft Corporation of China (COMAC) have communicated.
Summary:
- The IL-96 fuselage can be re-used for a Russian-Chinese wide-body.
- The existing IL96-300 cabin is on the small side whereas the Il-96-400 cabin is a bit larger than needed.
- The project will likely choose an intermediate size fuselage to reach the targeted 250 to 280 passenger capacity.
Pontifications: “Troubled” 787 is a thing of the past
LNC has been beset by technical issues since Aug. 17 that interferes with e-mail notification as well as links to Twitter, Facebook and Linkedin. We’re working on it with Wordpress.
By Scott Hamilton
Aug. 29, 2016, © Leeham Co.: Faulty engines dominated commercial aviation news last week.
First was ANA’s Boeing 787s were hit by issues with its Rolls-Royce engines. Corrosion was found on key engine parts. ANA cancelled flights to inspect and repair the engines.
Unfortunately, some media characterized the matter as the “latest” to hit the “troubled” 787. The London Telegraph is one example.
This characterization, of course, refers to the history of the 787 with its design and production challenges and later by the grounding from the lithium-ion battery fires.